Ummm... you can't buy your own design 😅
MagDock Phone Mount (1/4-20)
Category
Phone Mounts
Compatibility
Universal 1/4"-20, OSMODO, OSMODO PRO, Grip Rig 2
Difficulty
INTERMEDIATE
Version
v2.0
Files Included
MagSafe magnet plate v3STL • 1.8 MB1:4-20 MagSafe mountSTL • 3.2 MBMagodck hinge v6STL • 1.1 MBHINGE LONGSTL • 1.1 MBHINGE LONGERSTL • 1.1 MB
About this design
The MagDock Phone Mount (1/4-20) is a slim MagSafe-compatible phone mount designed to bolt to the front of the OSMODO PRO Top Handle or any rig with a front-facing 1/4-20 mount. This digital 3D-printable version lets you print your own compact phone mount for running DJI Mimo, monitoring, notes, teleprompter apps, or camera control right above the lens line.
3 sizes of the hinge are included.
The mount keeps your phone tight to the rig instead of hanging off a long arm, helping the build stay compact and balanced. It also includes a dedicated magnetic ND filter holder on the back so you can store your OSMO ND filters directly on the mount. This is a digital file only; phone, MagSafe magnets/pad, screws, tools, OSMODO PRO housing, top handle, and accessories are not included.
3 sizes of the hinge are included.
The mount keeps your phone tight to the rig instead of hanging off a long arm, helping the build stay compact and balanced. It also includes a dedicated magnetic ND filter holder on the back so you can store your OSMO ND filters directly on the mount. This is a digital file only; phone, MagSafe magnets/pad, screws, tools, OSMODO PRO housing, top handle, and accessories are not included.
Recommended Print Settings
Material:PETG/ABS
Infill:30
Supports:none
Notes
I print the magsafe magnetic phone mount (circle part) with PLA-CF, but any material should work. I just find printing over the steel plate and magnet is easier with that material.
Print the hinge in ABS.
You can print the 1/4-20 mount with PETG, but any material works for this. I recommend to print at a 45 angle on the flat part so the locking pins print without supports.
Print the hinge in ABS.
You can print the 1/4-20 mount with PETG, but any material works for this. I recommend to print at a 45 angle on the flat part so the locking pins print without supports.
License
Personal Use
This design is licensed for personal use only. You may not share, resell, sublicense, rent, host, transfer, or distribute the digital files or any 3D printed versions. Commercial use requires explicit permission from the designer.
Comments (0)
to leave a comment
No comments yet. Be the first to share your thoughts!
