Ummm... you can't buy your own design 😅
OSMODO Back Cover
Verified Fit
Category
Back Covers
Compatibility
OSMODO, OSMODO PRO
Difficulty
BEGINNER
Version
v1.0
Files Included
OSMODO Back Cover v2.2STL • 1.8 MB
About this design
It closes off the back of the housing in a minimal way so the rig feels like a complete body, while still keeping a dedicated USB opening for power. The opening is aligned with the Osmo Pocket 3 USB-C port which makes it easier to plug in without fighting the housing.
Compared to the Back Cover PRO this cover is physically slimmer, with fewer mounting points. It is meant for people who prefer a clean, compact setup and do not need extra cold shoes and 1/4-20 mounts on the back of the rig.
It attaches with two screws and is sized to work on both the original OSMODO and the new OSMODO PRO, so you can replace a worn or damaged cover or keep a second cover for backup.
Compared to the Back Cover PRO this cover is physically slimmer, with fewer mounting points. It is meant for people who prefer a clean, compact setup and do not need extra cold shoes and 1/4-20 mounts on the back of the rig.
It attaches with two screws and is sized to work on both the original OSMODO and the new OSMODO PRO, so you can replace a worn or damaged cover or keep a second cover for backup.
Hardware
Recommended Print Settings
Material:PETG
Infill:40
Supports:minimal
Notes
Walls: 4
Add Printed Ears to the corners to prevent warping
Add Printed Ears to the corners to prevent warping
License
Personal Use
This design is licensed for personal use only. You may not share, resell, sublicense, rent, host, transfer, or distribute the digital files or any 3D printed versions. Commercial use requires explicit permission from the designer.
Comments (0)
to leave a comment
No comments yet. Be the first to share your thoughts!
